Anti-Gravity SOLO Strap for Apple Vision Pro

€21,99 EUR

At Infinity One 3D we have designed the Anti-Gravity Solo Strap to improve the ergonomics of the Apple Vision Pro regardless of the Light Seal you are using, allowing the balance to be distributed in a more natural way on our head. We designed the Anti-Gravity Solo Strap to maintain...

Add to Wishlist

apple paygoogle paymasterpaypalshopify payvisa
Description

At Infinity One 3D we have designed the Anti-Gravity Solo Strap to improve the ergonomics of the Apple Vision Pro regardless of the Light Seal you are using, allowing the balance to be distributed in a more natural way on our head.

We designed the Anti-Gravity Solo Strap to maintain the original aesthetics of the Apple Vision Pro. In addition, our new fastening system balances the front part by pulling it up to relieve so much pressure on your face.

It has been designed from the ground up to improve both the grip, placement and ergonomics of the Apple Vision Pro by helping the Solo Knit Band to pull up the front and maintain perfect balance.

The front part printed in high quality 3D material , the fastening is engaged by pressure, it is not necessary to disassemble the Apple Vision Pro and in the back part a buckle printed in TPU is introduced, a flexible material that does not interfere with the ergonomics of the Knit Band only.

Thanks to the buckles that incorporate both parts, you can connect them with a nylon strap that will help balance the front weight by pulling it backwards, allowing it to be used for much longer and improving ergonomics.

By using the Anti-Gravity SOLO Strap you will get the following improvements:

  • Anti-Gravity SOLO Strap does not interfere with the original design of the Apple Vision Pro, maintaining its aesthetics and minimalism.
  • Greater relief in the frontal area thanks to the new upper fastening system.
  • You maintain total closure , helping immersion in content where you do not want light to enter.
  • Compatible with all cases , you can take it wherever you want.
  • Compatible with different sizes of Light Seal .
  • Easy to remove and put on , you simply have to fit it with a click. On the back you will only have to remove the Solo Knit Band.

Important

Placing the Anti-Gravity SOLO Strap requires adjustments to the Nylon by sliding the buckles to improve ergonomics. It is important not to tighten it excessively to avoid breakage. The nylon headband should rest lightly on top of the head to balance the weight.

To install the Anti-Gravity SOLO Strap on the Apple Vision Pro, you must apply slight pressure of the accessory on the side fins of the device. To remove them, you must first remove one side and then the other. Please do not exert too much force when bending the plastic to avoid breakage.

Remember that all of these accessories , except the nylon strap, are 3D printed . At InifinityOne 3D we have designed and printed the Anti-Gravity SOLO strap with high precision printers that guarantee normal operation.

Included:

- Video of installation instructions for the Anti-Gravity SOLO Strap for Apple Vision Pro that you can find here or on the YouTube channel .
- 3D printed front piece with resistant materials.
- 3D printed back piece with flexible materials.
- Nylon strap with adjustable buckles.

* There are all types of physiognomies for our faces so depending on the prominence of the forehead these characteristics can be affected.

**Apple Vision Pro is not included. Only the facial is included.
** Entirely designed by InfinityONE3D

***Install and use this accessory on the Apple Vision Pro will be done under the total and complete responsibility of the user, Infinity One will not be responsible for any damage or harm caused by the installation or use of it.

Installation Tutorial

Installation tutorial:


You can find all our installation tutorials in the article description or at https://youtube.com/@infinityone3d

Shipping

SHIPPING AND TARIFFS

InfinityONE ships to Europe, USA and Canada.

The processing time is around 2-3 days, and is independent of shipping, since it is the manufacturing of the product. Shipping times are detailed below.

Shipping Spain (peninsula)

Shipments to Spain are made with Correos Standard or Premium. (they all have tracking)

- Standard Shipping - With tracking number. Delivery time 5-10 days.
- Premium Shipping - With tracking number. Delivery time 24-72 hours.

Shipments to the Canary Islands and the Balearic Islands have a longer delivery time.

Europe Shipping

- Standard Shipping with Deutsche Post - With tracking number. Delivery time 15-20 days.
- Express Shipping - With tracking number 48-72h with UPS, DHL, Seur (DPD) or Zeleris.

Shipping USA and Canada

- Shipping with Deutsche Post - WITH tracking number. Delivery Time 15-20 days

Delivery time: The package will arrive in the country between 15 and 20 days after leaving our workshop. In addition to this period, you must take into account the time the package remains in customs if it is stopped, which can take 10 to 12 days.

Tracking number: Delivery will be carried out by national postal services.

When your package arrives in your country, remember to track it using national postal services.

Tariffs and Taxes

InfinityONE is not responsible for any applicable customs duties, import duties, taxes or other charges for international orders.

For orders to the EU, our products carry VAT and it is paid by the customer. If you need an invoice we can send it.

To ensure a hassle-free shipping experience, it is important to understand our shipping policy for shipments outside the European Union, especially with regards to customs clearance.

  1. Customs Duties and Taxes: The customer is responsible for paying any customs duties, import taxes or other charges that may apply in the destination country. These costs may vary depending on the value and nature of the items shipped, and must be paid according to local customs regulations.

  2. Import Requirements: It is crucial that the client is aware of the import requirements of the destination country. This may include restrictions on certain products, special licenses or additional documents required for customs clearance. Any failure to comply with these requirements may result in delays or detention of shipments by customs authorities.

  3. Risks and Losses: In the event that problems occur during customs clearance or international transportation, such as shipment retention, delays or losses, the client and buyer assume the corresponding responsibility. There are no refunds of the order amount.

Please note that if you refuse delivery of a package, you will still be responsible for any duties, taxes and customs fees incurred in shipping the package.

Duties and taxes are non-refundable once your order has been shipped. Additionally, returned products will not be eligible for a refund of associated duties and taxes.

By accepting our shipping services for shipments outside the European Union from Spain, the customer and buyer fully accept and understand the terms and conditions established in this policy . We appreciate your cooperation and trust in us as your international logistics service provider. If you have any questions or need more information, please do not hesitate to contact us.

Last update: March 15, 2024

Disclaimer

Legal Warranty and Returns

Before making any purchase, it is advisable to read our store's warranty and refund policy.

Our pieces are 3D printed and handcrafted, and in most cases, made to order. Since they are not injection-molded plastic or manufactured by industrial machines, they may have some marks or imperfections in their creation that do not affect their functionality at all.

All our products have been thoroughly tested and tried in different circumstances to ensure their optimal quality.

If your product arrives broken, please contact us to try to resolve the issue as soon as possible.

Legal Warranty

National Scope (Spain):

All our 3D printed products are subject to a legal conformity warranty of 3 years from the date of delivery. The warranty covers any non-conformity existing at the time of delivery of the product, including manufacturing defects, defective materials, and any damage that prevents the normal use of the product according to its nature.

European Scope (EU Countries):

3D printed products sold in European Union countries are subject to a legal conformity warranty of 2 years from the date of delivery, in accordance with Directive 1999/44/EC of the European Parliament and of the Council. The warranty covers any non-conformity existing at the time of delivery of the product, including manufacturing defects and defective materials.

International Scope (USA, Canada, Australia, and other countries):

3D printed products sold in countries outside the European Union are subject to a legal warranty of 1 year. The warranty covers any manufacturing defects and defective materials existing at the time of delivery of the product.

At Infinity One 3D, we will cover the first shipping of the warranty product via standard courier; after that, the customer will have to bear the corresponding costs.

Warranty Exclusions in All Scopes:

The following cases will not be considered non-conformities under the legal warranty:

  • Damage caused by improper or negligent use of the product.
  • Normal wear and tear of the product.
  • Unauthorized modifications or repairs made to the product.
  • Damage caused by failure to follow the maintenance and use instructions provided by our company.

Returns and Right of Withdrawal Applicable in All Scopes:

You have the right to withdraw from the purchase contract within 14 calendar days. However, this right does not apply to personalized products or products made according to the consumer's specifications. In some cases, our 3D printed pieces are made to order or are personalized products; in this case, the right of withdrawal and return would not be applicable.

Exclusions from the Right of Withdrawal:

  • Damage caused by improper or negligent use of the product.
  • Normal wear and tear of the product.
  • Unauthorized modifications or repairs made to the product.
  • Damage caused by failure to follow the maintenance and use instructions provided by our company.

Process to Request the Right of Withdrawal or Return:

  • You will need to send us communication of the shipping agency by email to info@infinityone3d.com, indicating in the subject “Withdrawal order [YOUR ORDER NUMBER]”.
  • The customer is responsible for all return shipping costs. Additionally, any customs fees, duties, or handling charges incurred during the return process will be the responsibility of the customer. These costs will be deducted from the total refund if they are not paid by the customer in advance.
  • If you chose an express or premium shipping method, according to the General Law for the Defense of Consumers and Users, the store is only obliged to reimburse the cost of standard shipping, not the premium or express shipping.

Refund

Once the products are received and their condition checked, we will proceed to refund the total or partial amount of the order depending on the condition of the product, unpaid customs fees at origin, and other uncovered expenses, within a maximum period of 14 days.

Disclaimer

All store products are individually and artisanally manufactured, it is important to know that they may have some aesthetic mark created during printing and that no piece is identical to another.

In our store, you will find all kinds of designs that will be 3D printed at the time you make the purchase. In the printing queue, priority will always be given to the first order that enters our systems.

Although the store appears with an estimated stock, this is done so that the customer knows that the corresponding materials exist to process their order within the estimated times if they make the purchase; therefore, this product will be considered as a made-to-order product.

We have several high-quality printing machines that allow us to offer the products with the best possible quality.

Frequently Bought Together

Total price:€63,96